- CLEAR: Motorcycle leather care
- Use on all Oil, Vegetable, Chromium, and Naturally Tanned or Naked motorcycle leather
- Removes surface dirt and grime
- Protects against damage due to the elements
- Protects your hide so it can protect YOU
- Not recommended for Suede or NuBuck leather (use our NuBuck and Suede Spray instead)
-
- BLACK: Black leather with minor scratches and abrasions
- Contains a small amount of black tint to cover up minor scratches and abrasions
- Rejuvenates and conditions black leather
- Protects against weather damage
- Not recommended for Suede or NuBuck leather (use our NuBuck and Suede Spray instead)
Product Description
Pecard Motorcycle Black Weatherproof Dressing was developed restore color and cover minor abrasions that occur over time to motorcycle leather goods. Cleans and shines all smooth and textured smooth oil tanned leather, offering protection against fingerprints and scuff marks. Unlike a dye that can over-darken scuffed areas, this specially formulated tint blends in and minimizes blemishes. It also revives faded black leather back to its rich, vibrant color, imparting a soft sheen. Not recommended for Suede or NuBuck leather (use our NuBuck and Suede Spray instead).
MOTORCYCLE BLACK WEATHERPROOF DRESSING APPLICATION:
* Please make sure the item is oil tanned and not coated leather. This dressing will not penetrate coated leather.
Using a lint-free cloth, apply the dressing on the leather item in a very thin coat. Allow the dressing 12-24 hours between applications to absorb into the leather. The number of applications varies based on the original condition of leather. When completely absorbed, reapply. Repeat until a thin layer of dressing remains on the leather surface.
Using a clean, dry, soft cloth, remove any excess dressing and gently buff the leather surface. This buffing action melts the blend of waxes into the topmost fibers to repel water and dust. Oils in the dressing moisturize the fibers to move smoothly against each other without binding and abrading.
Thoroughly remove all extra dressing, taking special note of any seams or crevices. Properly buffed, you will not need to worry about the tint rubbing off after treatment of your leather items. Once the desired look is achieved switch over to the Classic Dressing to maintain the leather as you would normally.
MOTORCYCLE LEATHER CARE APPLICATION:
Use a clean, lint-free cloth or your fingers to apply a thin coat of dressing to the leather. After 12-24 hours, check to see if there are any areas that have completely absorbed the dressing. If so, reapply and let the leather sit another 12-24 hours.
When a thin layer of dressing remains, use a clean, lint-free cloth to buff off any excess dressing. This buffing action will melt the blend of waxes into the topmost fibers to repel water and dust. Depending on the use of the leather item, you may need to reapply Pecard Motorcycle Leather Care Dressing two or three times per year.